What Are Electric Projector Screens?

An electric screen used in projection systems is a screen that can be raised and lowered at the touch of a button without needing to manually move the screen. To accomplish this, the screen is equipped with a tiny motor, typically housed inside the storage container.

This is an excellent feature in situations where a screen needs to be set up so that getting to it would not be practical. Although some manual screens, for instance, have a long line that hangs down to a level that can be reached. The electric screen provides certain aesthetic and also functional advantages.

Although the majority of screens in theaters are fixed because the primary function of the theater is to screen movies, there are numerous instances where screens powered by electricity would be required. When not in use, the net can fold into its unassuming container.

How Does It work?

The electronic screen is generally operated in two ways. It could be a switch mounted on the wall like an electrical switch that can be performed by it. In some instances, an infrared remote control could also be utilized to reduce the size of the monitor. Both of them have advantages.

A screen that is operated with remote control is likely to have the capability of being lower and then removed at any time until it’s fully extended. This can be particularly beneficial when the entire height of the screen isn’t needed.

Additionally, during a presentation, the screen is managed by the presenter without worrying about having someone else drive it. This can help when preparing a presentation because there’s no need to involve an additional person.

A switch, on the contrary, might not be able to lower the screen below a certain level, but it could be the most efficient because it doesn’t need to depend on the power of batteries or lines of sight. Although the switch is getting less and less sought-after, it can still play its place on some electronic projection screens.

Benefits Of Using

If you’re looking to get the most value from your projector, you’ll need to use a projector screen. The specially designed screens are coated with optical coatings that increase their reflective capabilities. They will give you the most stunning image possible. They have a myriad of benefits, including:


A high-quality projector screen is designed to showcase the maximum resolution of your projector. The projector’s actual resolution can only be seen by the eye when it hits the screen’s surface, which does not hinder the quality of its pixels.

Any surface with no absolute flatness and/or any texture with an area that is greater than the projector’s pixel’s dimensions could be able to distort and disrupt the geometry of the pixel.

Even though your eye won’t detect a single distortion with a film screen, you’ll be able to discern the lack of sharpness, clarity, and dynamic compared to a high-quality screen.


A good projector screen is calibrated to ensure that it does not affect the balance of colors in the image projected. Although it may appear that the white spectrum is irrelevant, grey is gray.

However, the truth is that within the range of gray and white, there is a possibility of tinting, where the white balance may shift slightly towards the yellow or blue spectrum.


Another benefit of projectors for home cinema screens is that their gain levels are chosen to improve your watching experience. When you have a bigger screen, you will need to consider increasing the gain to preserve the brightness of your image. In the same way, if you wish to boost the black level of your picture, you may prefer to lower the gain.


Determine Screen Size

 Find the ideal size of the screen based on the room’s dimensions, seating capacity, and the arrangement of the room. Generally, the height should be approximately 1/6 of the distance between the screen and the seating row behind. In ideal circumstances, the seat in front of the screen should have the exact distance between the two screen sizes from the screen.

When it comes to wall placement, the ideal height should consider the floor of the audience and the lower part of the screen and must not be more than four feet higher than the floor, allowing the back row to view the screen.

Select Aspect Ratio

 Select the aspect ratio that is appropriate for the type of application that you’ll be projecting. The most commonly used formats are 1.85:1 (Letterbox Video), 1.6:1 (Wide), 1.78:1 (HDTV), 1.33:1 (NTSC Video) 1:1 (Square) and 2.35:1.

Choose a Projector Screen Material

 Select a surface for your projector depending on your screen’s requirements and the space it will be set in. Certain characters work best in dark rooms, while others are better suited to more light-colored conditions. In addition, various materials may provide additional benefits, like an increased viewing angle.

Pick the Screen

Consider whether you’d like something stationary, like an adjustable frame, or one that can retract and extend like motorized or manual screens. If you want to project from a portable location, think about whether you’d like the use of a tripod, pull-up, or folding tabletop screen.

Thank you so much for reading this article, I hope you like the article and got your solution.

Jonathan Holmes
Jonathan Holmes is a projector enthusiast and expert based in the United Kingdom. As the founder and editor of ProjectorPress.com, Jonathan provides detailed buying guides, reviews, and advice to help consumers find the perfect projector for their needs. With over a decade of experience testing and researching projectors, Jonathan takes pride in being an industry insider. He stays up-to-date on all the latest projector models and technologies to provide readers with accurate, hands-on information.